Are you thinking about getting a plasma cutter? A plasma cutter is a handy tool that can cut and manipulate metals. You can use it both for professional use and even for your housework.
However, we know how intimidating the process of finding the right plasma cutter can be. That is why we have put together this guide to make your life easier.
Below, we have some of the things you can look out for when buying a plasma cutter so that you can find the best one.
One of the critical factors that decide the model of the plasma cutter is the input power. Most plasma cutters require a high power of electricity in order to work efficiently.
Usually, plasma cutters are made to be for 30 amps at 110 volts power outlet or 50 amps at 220 volts power outlet. There are some models that are able to work with both.
You will find amperage ratings with all plasma cutters. So when you are buying a plasma cutter, make sure you check out its minimum voltage and amperage requirement and whether your area supports that electrical outlet.
When buying a plasma cutter, a very important thing to consider is its duty cycle. The higher the amperage output, the greater its duty cycle. If you think you will use the plasma cutter often but not continuously, you can go for one depending on its outmost amperage output.
However, if you are going to use the tool for long periods of time, it is better to buy one based on the thickness of the materials.
If you are going to buy a plasma cutter, you should invest in the best plasma cutter. This is why the cutting speed of your device is important because that will determine its performance.
Before making your purchase, make sure you consider the thickness of the metal, along with its cutting speed. You should also compare the cutting speed with the quality of the cut. There are different types of quality cut that you can get with some plasma cutters.
First, we have the razor cut that provides the highest quality cut. You can use this cut for less thick metals at the highest cutting speed. If you are working with thicker metals, you can get a good quality cut. Finally, a severe cut is used to cut very thick metals at a slow speed.
Most plasma cutters you will come across use normal air for their operation. For portable plasma cutters, many use bottled nitrogen. Since carrying bottled air can be very tedious, it is better to go for a plasma cutter with a built-in air compressor. With this, you will not only be saving money but also get a lightweight and portable plasma cutter.
If you usually work in remote areas, places without any power outlet, you need a plasma cutter with a built-in inverter. These types of plasma cutters are able to take DC power and pass it through a high-frequency transistor-inverter, starting from about 10 kHz to 200 kHz.
The price of the plasma is also something that you should consider. If you want to stay within your budget, go for a product that offers the best features but comes at a low price.
So basically, these are some of the things you need to consider when buying a plasma cutter. The main things you should focus on is quality and its power. Look for the best plasma cutters available on the market right now and select the one best suited for you.