If you don’t want to drink straight-up tap water, then a refrigerator water filter is a great appliance for you. It’s not only a way to get fresh and healthy drinking water but also it’ll save your money.
Once you start using a water filter in your refrigerator, you don’t need to spend extra money on water bottles and other water filters as well. This great appliance is budget-friendly and easy to use and maintenance.
So, let’s dive into the article to know about what you need to do to maintain a refrigerator water filter.
Types of the Maintenance Process of a Refrigerator Water Filter
When you want to do regular maintenance to your refrigerator water filter, you have two ways to do it –
1/ Cleaning the filter or
2/ replace the filter.
Below we will discuss both of these.
Step 1: Turn off the Power of the Fridge
Before you begin your work, the first thing you need to disable the power of your refrigerator and disconnect it from the power source.
So now you have no chance of electrocution. Make sure your safety first!
Step 2: Figure out the Location of the Water Filter
Now, you’ll need to find out the location of the filter. This could depend on the type of refrigerator.
Most of the cases, the filter is positioned at the base of the refrigerator. Or in some fridges, the filter is located right inside the door where you can easily access the filter canister.
Step 3: Remove the Water Filter Canister
After confirming the location of the filter you need to pull out the water filter canister if you want to clean or replace it.
You will just need to gripe the top or the side of the canister and pull it anticlockwise in order to remove it. It’s simple than you think!
The process of cleaning a refrigerator water filter really a very easy work to do.
You can use Dish soap or vinegar water to clean it, both are safe for your filter. Also, you can find many other solvents in the local stores that are specially made for cleaning water filters.
Soak the filter in the cleanser for about 10 to 15 minutes. But this time depends on how messy it is.
Then wash the filter under a gentle flow of water until the soapy water runs clear. Let it dry in the air and then place it back in its position again.
Step 5: Change the Filter If Needed
If you see that the water filter is beyond the cleaning, you need to change it.
Many people don’t realize the importance of changing the refrigerator water filter within a certain time. The reality is, many people don’t even know that.
Experts recommend that you will need to change your refrigerator water filter within 3 to 6 months. If you change it annually, it’s also ok, but it’s better if you change it within at least 6 months.
Changing a refrigerator water filter really an easy job and you will not need any tools to do it. Let us tell you how it’s done.
First of all, you’ll need to remove the holder at the end of the filter canister. Just slide it gently to remove it.
Now, slide the holder over your new filter and remove the protective cover on the end of the new filter.
Line the water filter straight and press it in its place securely and give a clockwise turn to reconnect the water filter to the fridge.
Your job is done!
Finally, you must say that a refrigerator water filter is a great gadget for your home. So you need to maintain it with care.
Here, we discussed in short about the maintenance process of a refrigerator water filter. Hope this article will helpful for you.
Check kitchenvale’s Guide for more info about it.