A track saw (also referred to as plunge saw) is the secret weapon of most of the DIY creators or carpenters on which they rely on frequently. This saw serves several purposes in woodworking, and consequently have been a crucial companion of woodworkers for a long time.
The usefulness of a track saw can hardly be exaggerated. From making precise cuts to being easily portable, a track saw has reasons to be a carpenter’s top favorite choice.
A track saw consists of a circular saw and a track. The saw is similar to a circular saw, but that is where the common ground ends. It glides along the track, which helps to gain stability and eliminates possibilities of slip-away.
When you want to cut, just place and align the track according to the way you want your cut, then plunge the saw into the wood piece and slide it along the track. You can adjust the plunge depth, too.
As the circular saw rolls on the track, you can be care-free from deviating from the path because the metal track will never allow it to happen, resulting in a fine, straight cut. Rubber strips beneath the track saw sticks to the material preventing uninvited sliding on the material.
Therefore, there is no necessity to use a clamp in a track saw. The following tasks can be performed with a track saw:
Long, Straight Cuts
The prime use of track saw is to make long, straight cuts. The track comes in handy at the time of making straight cuts, providing balance to acquire precision. Metal tracks with increased length allow to cut longer. Two tracks can be combined to form a longer track.
Cutting Plywood in Job Sites
Mainly made for cutting woods, a track saw is also able to cut through plywood. However, transporting plywood from the site to your workplace can be cumbersome. In such a situation, you can carry your track saw to the site and get your job finished right there. This saves both – your time and effort.
Laying Down Wood Floor
In the case of wood flooring, numerous straight cuts are required, a task the track saw is specialized. The track saw has occupied the space of guess-work, leaving no space at all in modern carpentry.
All you have to do is to mark the way you want your cut and align the track accordingly, and just slide the blade along it. Thus, manifold cuts can be produced within a short span of time and also with precision.
Cutting Drywall Board
One of the difficulties that arise at the time of cutting drywall boards is the production of dust. To avoid this phenomenon, you can choose the track saw as your power tool. Track saw has decent dust collecting systems that will help you to get rid of the dust.
Track saw can make clean cuts on laminate as well. Although circular saws or table saws are unable to make clean cuts on it neatly, leaving large tears and rips. Needless to say, when you make an attempt to cut laminates, make sure that you mount blades suitable for this task.
Any cut that can be made with a circular saw can also be done with a track saw. Cutting studs is one of those tasks that fall in the common ground of these saws. Thus, using a versatile tool instead of buying several, each for a specific task can save you from breaking your wallet.
Actually, a tool’s usage depends largely on its user’s ability to maximize its utility. Apart from the examples stated above, you can try out new experiments with your makita track saw, which may end you up in discovering new ways of using a track saw.